Pairing Bluetooth Device; Selecting Audio Source - MacDon M2170NT Operator's Manual

7. Rotate VOL/SEL knob (B) to display ON and press VOL/SEL
to select.
NOTE:
®
Bluetooth discovery will be active every time the radio is
turned off and back on.
Pairing Bluetooth ® Device
The installed radio allows the operator to pair a Bluetooth
®
1. Check that Bluetooth
Activating Bluetooth ®
2. Press POWER button (A) to turn the radio ON.
This will set the radio to Bluetooth
Bluetooth ® feature has been activated. If not, refer to the
radio operator's manual for instructions to access the
SETUP MENU, BT SET screen.
3. Turn the mobile device's Bluetooth
refer to the device's operator's manual. The radio appears
as a discoverable device.
4. Select VR-5650 on the mobile device.
NOTE:
A passkey is required to connect to the Bluetooth
The default passkey is four zeros (0000).
5. Enter the default passkey 0000. The radio will display
CONNECTED (B) and Bluetooth
upper right corner of the screen.

Selecting Audio Source

On the receiver, select the active media source when playing media from different sources.
1. Press POWER button (A) to turn the radio on.
2. Press SRC button (B) until the required audio source is
displayed (C) on the screen.
262171
OPERATOR'S STATION
is enabled and that the radio has been set to DISCOVER mode. For instructions, refer to
Feature, page 68.
®
discover mode if the
® to ON. For instructions,
®
icon (C) appears in the
® phone or audio device.
A
®
radio.
Figure 3.48: Radio Display
A
Figure 3.49: Bluetooth
69
MOTOROLA
CONNECTED
B
B
MOTOROLA
BT AUDIO
C
®
Radio
C
Revision A