MacDon M2170NT Operator's Manual page 262

1. Start the engine and use HEADER TILT switches (A) and (B)
on the ground speed lever (GSL) to set header tilt to the
mid-range position.
2. Engage the header by pushing and holding down HEADER
ENGAGE switch (A), and pulling up on collar (B).
3. Select one of the following deck positions using the DECK
SHIFT switches on the operator's console:
• Right-side delivery (A)
• Center delivery (B)
• Left-side delivery (C)
262171
OPERATION
B
Figure 5.102: GSL
Figure 5.103: Header Engage Switch
A
Figure 5.104: Header Deck Shift Switches
242
A
A
B
B
C
Revision A