MacDon M2170NT Operator's Manual page 178

ATTACHING HEADERS TO AND DETACHING HEADERS FROM WINDROWER
19. Disengage the safety props on both lift cylinders as follows:
a. Turn lever (A) away from the header to raise the safety
prop until the lever locks into the vertical position.
b. Repeat the previous step for the opposite cylinder.
NOTE:
If the safety prop will NOT disengage, raise the header to
release the prop.
20. Start the engine.
21. Press HEADER DOWN switch (A) on the GSL to fully lower
the header.
22. Select FLOAT ADJUST (A).
262171
Figure 4.99: Safety Prop Lever
A
Figure 4.100: Ground Speed Lever (GSL)
Figure 4.101: HarvestTouch
158
A
A
™
Display
Revision A