MacDon M2170NT Operator's Manual page 214

OPERATION
IMPORTANT:
Check the levels of the following fluids. Add more, if necessary:
• Engine oil – refer to
Checking Engine Oil Level, page 192
• Hydraulic oil – refer to
6.7.3 Checking Hydraulic Oil, page 319
• Gearbox oil – refer to
IMPORTANT:
Do NOT tow the machine to start the engine. This will damage the hydrostatic drives.
NOTE:
™
When the HarvestTouch Display receives a wake-up signal, the display wakes up from sleep mode and closes the battery
disconnect relay. The display enters a boot-up sequence which takes approximately 40 seconds. The following items trigger
a wake-up signal for the console:
• Key switch ignition or accessory positions
• Cab door switch
• Horn button
• Hazards button
• Field lights button
• Clearance lights button
• Road lights button
• High beam button
To start the windrower's engine, follow this procedure:
1. Ensure that engine exhaust pipe (A) is not covered or
obstructed.
A
Figure 5.13: Engine Exhaust
194
262171 Revision A