3. Press WINDROWER CODES (A) from the DIAGNOSTIC menu.
4. Verify on the screen that there are no active error
messages. You must resolve all active fault codes before
you can clear the fault codes.
5. Press and hold eco engine control (EEC) button (A) for 5
seconds. The CONFIRM YES/NO dialog box is displayed.
6. Select YES to save changes and close the dialog box, or
select NO to close the dialog box without saving changes.
262171
OPERATOR'S STATION
Figure 3.139: Diagnostic Menu
Figure 3.140: Eco Engine Control (EEC) Button
110
A
A
Revision A
1014733