1. Raise the caster wheel. For instructions, refer to
Caster Wheel, page
429.
2. Remove eight bolts (A) and nuts (four of each on each side
of caster) attaching axle (B) to forked caster (C), and
remove wheel assembly (D) from caster (C).
3. Remove eight wheel nuts (A) that secure axle (B) to
wheel (C).
4. Separate axle (B) and wheel (C).
Raising Caster Wheel
This procedure describes how to raise a caster wheel.
1. Park the windrower on a level surface.
2. Block the drive wheels.
3. Place ground speed lever (GSL) (A) in PARK.
4. Shut down the engine, and remove the key from
the ignition.
262171
MAINTENANCE AND SERVICING
Raising
Figure 6.239: Caster Wheel Assembly
Figure 6.240: Caster Wheel Assembly
Figure 6.241: GSL Position
429
C
A
B
C
A
D
B
A
Revision A