Table of Contents
Advertisement
3. Remove the black plastic covers from negative cable
clamps (A). Loosen the clamps and remove the cable from
the batteries.
4. Remove the red plastic covers from positive cable
clamps (B). Loosen the clamps and remove the cable from
the batteries.
Connecting Batteries
1. Move latch (A) towards the right cab-forward side of the
windrower.
2. Grasp louver (B) and lift the hood to open it.
3. Lift up on the cab-end of cover (A) to disengage it from
retaining tab (B), and swing the cover away from the frame.
4. Remove the plastic caps from the battery posts, if these are
present.
262171
MAINTENANCE AND SERVICING
Figure 6.149: Battery Location
Figure 6.150: Engine Compartment Hood
Figure 6.151: Battery Location
380
A
B
A
B
A
B
Revision A
Advertisement
Table of Contents
Troubleshooting
