MacDon M2170NT Operator's Manual page 378

3. Release hose tension clamps (A) and slide them away from
filter (B).
4. Pull the hoses off filter (B) and remove the filter.
5. Position new filter (B) and attach it to fuel tank hose (A).
NOTE:
When positioning the new filter, ensure that the arrow on
the filter points toward the fuel tank.
6. Attach fuel vent hose (A) to filter (B) and secure both hoses
with tension clamps (C).
7. Close the hood. For instructions, refer to
Hood, page 288.
262171
MAINTENANCE AND SERVICING
Figure 6.114: Fuel Tank Vent and Filter
Figure 6.115: Fuel Tank Vent and Filter
6.3.2 Closing
Figure 6.116: Fuel Tank Vent and Filter
358
B
A
B
A
B
C
A
Revision A