Table of Contents
Advertisement
17. Press and hold REEL AFT button (B) on GSL to retract the
walking beam.
18. When complete, exit the narrow transport control page by
pressing button F5 or F6 again (which ever is active). The
exit transport operation warning will display on the
™
HarvestTouch
Display.
NOTE:
Press F5 or F6 on the console, or HOME or RETURN on the
™
HarvestTouch
Display to cancel transport operation at
any time.
19. Shut down the engine, and remove the key from
the ignition.
20. Reinstall lock pins (B) into the drive wheel legs.
21. Turn the walking beam lockout valve (A) to the closed
position (90° from the valve).
262171
OPERATION
Figure 5.86: Transport Control Buttons
A - Reel Fore
Figure 5.87: Exit Transport Operation Warning
Figure 5.88: Transport Locks
233
A
B
B - Reel Aft
A
B
Revision A
Advertisement
Table of Contents
Troubleshooting
