MacDon M2170NT Operator's Manual page 215

2. Ensure that cab-forward or engine-forward directional
lock (A) at the base of the steering column is engaged.
3. Move ground speed lever GSL (A) into PARK (C).
4. Turn the steering wheel until it locks.
IMPORTANT:
Do NOT attempt to force the wheel out of the locked
position or the steering system may become damaged.
NOTE:
The steering wheel will be able to move slightly when it is
in the locked position.
5. Fasten your seat belt.
6. Push HEADER ENGAGE switch (B) to ensure it is in the OFF
position.
262171
OPERATION
A
Figure 5.14: Direction Locks
A
Figure 5.15: Operator Controls – M2 Series
Windrower
195
A
C
B
Revision A