Table of Contents
Advertisement
8. Change the oil to remove acids and other by-products of combustion from the engine.
9. Test the engine coolant antifreeze concentration to ensure it is sufficient to protect the engine against the lowest
expected ambient temperature.
10. Drain the windshield washer tank or ensure the fluid can endure the lowest expected temperatures.
11. Lubricate the windrower thoroughly, leaving excess grease on fittings to keep moisture out of bearings. Apply grease to
the exposed threads and the sliding surfaces of components.
12. Remove the batteries. For instructions, refer to
store in a cool, dry place not subject to freezing.
13. If possible, block up the windrower to take the weight off the tires. If this is not possible, increase the tire pressure by
25% for storage. Adjust the tire pressure to recommended operating pressure before next use.
IMPORTANT:
Do NOT exceed the maximum pressure specified on the tire's sidewall.
14. Store the windrower in a dry, protected place.
15. If the windrower will be stored outside, seal the air cleaner intake and exhaust pipe with plastic bags and/or
waterproof tape. Cover the windrower with a breathable cover.
NOTE:
Avoid plastic covers that can trap humidity.
262171
OPERATION
Removing Battery, page
378. Bring the batteries to full charge, and
235
Revision A
Advertisement
Table of Contents
Troubleshooting
