5.3.6 Operating the Windrower
Understanding how to properly enter, drive, and stop the windrower is essential for safe and smooth operation.
Entering and Exiting Windrower
Operating the windrower starts with learning how to safely enter and exit the windrower using the platform and doors.
CAUTION
To prevent slipping and possible injury, ALWAYS face the windrower and use the hand rail when dismounting or
mounting. NEVER attempt to get on or off a moving windrower. Before leaving the operator's seat for any reason:
• Park the windrower on a flat, level surface. Put the ground speed lever into the PARK position and center the
steering wheel in the locked position. Wait for the HarvestTouch
confirm that the parking brake is engaged.
• Fully lower the header and the reel (if applicable).
• Disengage the header drives.
• To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove
the key from the ignition.
• Turn off the lights, unless their being on is required for inspection purposes.
• Release the seat belt.
• Turn off the wipers.
• Raise the armrest and steering wheel for easier exit and re-entry.
• Lock the cab door if you are leaving the windrower unattended.
Swing-away platform with stairs (A) is provided on the left side
of the windrower to accommodate cab-forward and engine-
forward access to the operator's station as well as several
maintenance tasks.
Two doors (B) are provided for cab entry and exit in either cab-
forward mode or engine-forward mode. Enter the cab using the
door opposite the operator's console.
Adjusting Ground Speed Limit
The speed at which the windrower travels can be adjusted in the HarvestTouch
varies depending on its seat position.
The windrower has the following selectable ground speed limits depending on seat position:
262171
OPERATION
™
Display to beep and display a red P symbol to
Figure 5.28: Platforms and Doors
™
Display. The speed of the windrower
203
B
A
Revision A