MacDon M2170NT Operator's Manual page 161

ATTACHING HEADERS TO AND DETACHING HEADERS FROM WINDROWER
5. Push the link on latch (C) and pull handle (A) on hydraulic
hose management system (B) rearward to disengage the
arm from the latch.
6. Move hydraulic hose management system (B) toward the
left cab-forward side of the windrower.
7. Connect hydraulic hose management system (A) to the left
outer leg of the windrower by pushing ball stud (B) into ball
stud latch (C).
NOTE:
The hydraulic hoses have been removed from the
illustration for clarity.
8. Rotate left signal light placard (A) to the up (vertical)
position.
262171
C
Figure 4.59: Hydraulic Hose Management System
Figure 4.60: Windrower Left Outer Leg
Figure 4.61: Left Signal Light Placard
141
B
A
B
A
A
Revision A
C