Ground Speed Lever Switches - MacDon M2170NT Operator's Manual

3.16.3 Ground Speed Lever Switches

The switches on the ground speed lever (GSL) control the most common header functions.
The GSL (A) is located on the console.
GSL controls — front
• One-Touch-Return position switch (A)
• One-Touch-Return position switch (B)
• One-Touch-Return position switch (C)
• Reel or disc speed (D) (also operates turn signals when the
header is disengaged)
• Reel position (E)
• Autosteer engagement (F) (if equipped)
• Header position (G)
• Back switch (H) – controls HarvestTouch
• Select switch (J) – controls HarvestTouch
6. Before engaging the autosteer system for the first time, become familiar with the functions of the emergency stop
(E-Stop) button. The E-Stop button is only used with Trimble
™
Autopilot Motor Drive [APMD]). For instructions, refer to
Systems, page 216.
262171
OPERATOR'S STATION
Figure 3.59: GSL
6
™
Display functions
™
Display functions
Figure 3.60: GSL Function Groups
® Electric - On Wheel systems (EZ Pilot
Operating the Emergency Stop Button – Trimble
77
A
H
D
C
G
J
F
E
A
B
® / EZ Pilot ® Pro and
® Autosteer
Revision A