Table of Contents
Advertisement
OPTIONS AND ATTACHMENTS
7.4 Transport
Several kits are available which facilitate moving the header from field to field.
7.4.1 Secondary Brake Package
The secondary brake package allows the windrower to have a secondary park brake.
The secondary park brake can be engaged and disengaged from the One-Touch buttons on the ground speed lever.
MD #B7424
Instructions are included with the kit.
7.4.2 Ballast
Ballast kits are for windrowers attached to draper headers only.
Initial rear ballast package (MD #B9070): 1 unit (163 kg [360 lb.])
Additional rear ballast package (MD #B6054): 2 units (163 kg [360 lb.] each)
Installation instructions are included.
For information about ballast requirements, refer to
9.1 Ballast Kit, Booster Spring Kit, and Tire Pressure Requirements,
page
451.
7.4.3 Wiring Harness for Weight Box - ISO
The towing harness is used together with the weight box.
B9052
Installation instruction is included in the bundle.
7.4.4 Clevis Style Hitch Assembly (Stocked in EU)
The towing harness is used together with the weight box.
MD #346207
Installation instruction is included with the part.
7.4.5 Towing Harness
The towing harness is used together with the weight box.
MD #B6048 – Weight box harness only. Includes hitch pin and wiring for use with slow speed header transport option.
Instruction MD #147868 is included in the bundle.
7.4.6 Weight Box
A weight box installed onto the windrower header lift system is required to transport a header behind the windrower.
MD #B6974 – Weight box, narrow transport
A towing harness is required to use the weight box. For more information, refer
to7.4.5 Towing Harness, page
434.
434
262171
Revision A
Advertisement
Table of Contents
Troubleshooting
