Table of Contents
Advertisement
MAINTENANCE AND SERVICING
3. Leave excess grease on the fitting to keep out dirt.
4. Replace any loose or broken fittings immediately.
5. If a fitting will NOT take grease, remove and clean it thoroughly. Also clean the grease passageway. Replace the fitting
if necessary.
Grease Points
Add grease to these greasing points according to the maintenance schedule. Be sure to leave a small amount of grease on
top of each fitting to prevent contamination.
B
C
A
Figure 6.69: Grease Points
C - Caster Wheel Hub (Both Sides) 23
A - Top-Link (2 Places) (Both Sides)
B - Caster Pivot (Both Sides)
23. Do NOT overgrease. Use 1 pump of grease.
331
262171
Revision A
Advertisement
Table of Contents
Troubleshooting
