6.5 Checking the Operation of the Target Memory for Downloading
Check that the destination memory area for downloading is operating correctly.
When the destination memory is SDRAM or DRAM, a register in the bus controller of the MPU
must be set before downloading. Set the bus controller correctly in the [IO] window according to
the memory type to be used.
When the required settings, such as the settings for the bus controller, have been completed,
display and edit the contents of the destination memory in the [Memory] window to check that the
memory is operating correctly.
Note: The above way of checking the operation of memory may be inadequate. It is
recommended that a program for checking the memory be created.
• Select [Memory...] from the [CPU] submenu of the [View] menu and enter H'00000000 in
the [Display Address] edit box.
Figure 6.2 [Display Address] Dialog Box
298