Table of Contents
Advertisement
[Enable]:
[Coverage acquisition start address (Mainboard, 4M)]:
[Coverage acquisition start address (Optionboard, 8M)]:
[OK]:
[Cancel]:
This dialog box will only be displayed once after initiation of the emulator. To open this dialog
box, select [Hardware Settings...] from the popup menu of the [Code Coverage] window. When
the [Coverage Acquisition Range Setting] dialog box is closed, the [Open Coverage] dialog box
appears.
Checking this box allows acquisition of code coverage
information.
The emulator specifies the measurement start address in the
range of 4 Mbytes.
The emulator specifies the measurement start address in the
range of 8 Mbytes. This function is only available when the
expansion profiling unit is connected to the emulator.
Closes this dialog box by setting the specified condition.
Closes this dialog box without setting the specified condition.
Figure 5.105 [Open Coverage] Dialog Box
279
Advertisement
Table of Contents
