(2) [Runtime Count] dialog box
Double-clicking the [Runtime Count] event channel displays this dialog box. Conditions of the
eventpoint can be set on the [Condition] and [Action] pages.
(a) [Condition] page:
Specifies the execution time of the user program.
Figure 5.53 [Runtime Count] Dialog Box ([Condition] Page)
[The minimum time to be measured]:
[Runtime count]:
212
Specifies the resolution of the timer for execution time
measurement as any of the following values:
20 ns, 40 ns, 100 ns, or 400 ns
Specifies the execution time conditions.
[Don't care]: Specifies no execution time condition.
[Cycle]: Enters the measurement cycle counts; D'0 to D'1099511627775 is
available.