Table of Contents
Advertisement
(1) Acquiring Internal Trace Information (Internal trace)
Selecting the [Set...] menu in the popup menu of the [Internal/AUD/Usermemory acquisition]
window displays the [Internal/AUD/Usermemory acquisition] dialog box. When [Internal trace] is
selected in [Trace Type] within the dialog box, the trace information is acquired by using the
internal trace function.
When the emulator does not set the acquisition condition of the trace information, the trace
information is acquired by the internal trace function in default.
The acquired trace information is displayed in the [Internal/AUD/Usermemory trace] window.
Figure 5.56 [Internal/AUD/Usermemory trace] Window (Internal Trace)
Some MPUs to be debugged display the items below. For details on the specifications of each
product, refer to the additional document, Supplementary Information on Using the SHxxxx, or
the online help.
[PTR]
[IP]
[Master] (Bus Master)
[Type]
216
The trace buffer pointer (+0 for the last executed instruction)
The amount of acquired trace information
Type of bus master accessed
Type of trace information:
BRANCH: Branch source
DESTINATION: Branch destination
MEMORY: Memory access
S_TRACE: Executed Trace(x) function
LOST: Lost trace information (only in the realtime mode)
Advertisement
Table of Contents
