Table of Contents
Advertisement
[Trace type]:
[AUD trace]
[Internal trace]
[User Memory trace]
[Trace Mode 1]:
[Realtime trace]
[Non realtime trace]
[Trace mode 2]:
[Trace continue]
[Trace stop]
[Break]
[AUD Mode]:
[Enable free trace]
[Time stamp clock]
[AUD trace display range]:
[Start pointer]
[End pointer]
[Trace Extend Mode]: Sets whether or not internal performance counter Ch3 or Ch4 is included
[Trace data with PPC]
Note: The items that can be set in this window differ according to the product. For details on the
settings for each product, refer to the online help.
344
Selects the type of trace function.
Selects the AUD trace function.
Selects the internal trace function.
Selects the user-memory output trace function.
Selects the operation mode when the trace information has been
sequentially generated.
Some trace information will not be output.
The CPU stops operations until the trace information is output.
Specifies the operation when the AUD trace buffer of the emulator
becomes full.
The oldest trace information is overwritten to acquire the latest
trace information.
When the trace buffer becomes full, the trace information is no
longer acquired.
A break occurs.
Sets the mode when the AUD trace function is used.
When checked, a free trace is enabled.
Specifies the resolution of the timer for time stamp as any of the
following values:
20 ns, 40 ns, 100 ns, or 400 ns
Sets the trace display range when the AUD trace function is
used.
Enters the numerical start pointer value of the display range.
Enters the numerical end pointer value of the display range.
as the item for trace acquisition.
When checked, internal performance counter Ch3 or Ch4 is
included.
Advertisement
Table of Contents
