Adding And Removing Sessions - Renesas SH-4A User Manual

• From the dialog box
1. Select [Options -> Debug Sessions...]. This will open the [Debug Sessions] dialog box
(figure 4.31).
2. Select the session you want to use from the [Current session] drop-down list.
3. Click the [OK] button to set the session.

4.4.2 Adding and Removing Sessions

A new session can be added by copying settings from another session or removing a session.
• To add a new empty session
1. Select [Options -> Debug Sessions...] to display the [Debug Sessions] dialog box (figure
4.31).
2. Click the [Add...] button to display the [Add new session] dialog box (figure 4.32).
3. Check the [Add new session] radio button.
4. Enter a name for the session.
118
Figure 4.31 [Debug Sessions] Dialog Box