Table of Contents
Advertisement
Set trace acquisition conditions for on-chip event channels Ch5 (OA), Ch6 (OA), Ch7
(SystemBus), Ch8 (SystemBus), and Ch12 (Branch) or software trace.
Items that can be displayed in the sheet are listed below.
[Type]
AUD event channel number and type
Normal: Standard event channel
Delay: Event channel that delay conditions can be set
Reset: Event channel that can be set as the reset point of the AUD sequential
event
[State]
Whether the eventpoint is enabled or disabled
Enable: Valid
Disable: Invalid
[Condition] A condition that satisfies an eventpoint. The displayed contents differ depending on
the channel.
[Action]
Operation of the emulator when an eventpoint condition is satisfied. The displayed
contents differ depending on the channel.
When an event channel is double-clicked or selected and [Edit...] is selected from the popup menu
in this window, the [Chx] dialog box is displayed.
The [Chx] dialog box consists of the [General], [Branch], [Window], [Software], [SystemBus],
[Count], [Delay], and [Action] pages.
The combination of the conditions set in each page is set as the detection condition of eventpoints.
183
Advertisement
Table of Contents
