Table of Contents
Advertisement
External bus trace function
This function is enabled when the external bus pins of the MPU are connected to the emulator.
The methods to acquire the external bus trace are described below.
(a) Setting the bus trace
Set the multiplexed state of the bus pins or the connected memory, referring to section 2.7.2,
External Bus Trace/Break Function and External Bus Performance Function.
(b) Setting the trace acquisition mode
Click the [BUS/MFI trace] window with the right-hand mouse button and select [Acquisition...]
from the popup menu to display the [BUS acquisition] dialog box. Set the acquisition mode for the
external bus trace as shown in figure 6.56.
Figure 6.56 [BUS acquisition] Dialog Box
353
Advertisement
Table of Contents
