Table of Contents
Advertisement
Usage Example of Sequential Break Extension Setting: A tutorial program provided for the
product is used as an example. For the tutorial program, refer to section 6, Tutorial, in the
TM
SuperH
Family E200F Emulator User's Manual.
The conditions of Event Condition are set as follows:
1. Ch1
Breaks address H'00001084 when the condition [Prefetch address break after executing] is
satisfied.
2. Ch2
Breaks address H'0000106c when the condition [Prefetch address break after executing] is
satisfied.
3. Ch4
Breaks address H'000010aa when the condition [Prefetch address break after executing] is
satisfied.
4. Ch10
Breaks address H'000010e0 when the condition [Prefetch address break after executing] is
satisfied.
Note: Do not set other channels.
5. Set the [CPU Sequential Extend] page as shown in figure 5.30.
Then, set the program counter and stack pointer (PC = H'00000800, R15 = H'00010000) in the
[Registers] window and click the [Go] button. If this does not execute normally, issue a reset and
execute the above procedures.
The program is executed up to the condition of Ch10 and halted. Here, the condition is satisfied in
the order of Ch2 -> 1 -> 4 -> 10.
181
Advertisement
Table of Contents
