Changing The Functions When Using The E200F Main Unit - Renesas SH-4A User Manual

2.7.1

Changing the Functions when Using the E200F Main Unit

Select the item in the [Main board mode setting] combo box of the [Function select] dialog box.
• [RealProfile Area1 (function mode)]: Measures accumulation of execution time of each
function; the subroutine execution time is not included.
• [RealProfile Area1 (nest mode)]: Measures accumulation of execution time of each function;
the subroutine execution time is also included.
• [Coverage (4M)]: Acquires the information on the C0 coverage in the 4-Mbyte areas.
• Others: The peripheral I/O analyzer function can be selected depending on the product.
Note: Using the realtime profiling and coverage functions increases the ranges that can be set
with the expansion profiling unit.
78
Figure 2.19 [Function select] Dialog Box