When an event channel is double-clicked or selected and [Edit...] is selected from the popup menu
in this window, the [Chx] dialog box is displayed.
The [Chx] dialog box consists of the [Address], [Data], [Interrupt], [Count], [Delay], and [Action]
pages.
The combination of the conditions set in each page is set as the detection condition of eventpoints.
(1) [Address] page
Specifies the address condition.
Figure 5.43 [Chx (Delay)] Dialog Box ([Address] Page)
[Address]:
[Don't care]:
[Address]:
200
Sets the address condition.
Sets no address condition.
Sets the single address.