Table of Contents
Advertisement
Fasten the user system and the H-UDI/AUD probe with screws as shown in figure 2.15.
Figure 2.15 Fastening the User System and the H-UDI/AUD Probe
Note that the pin number assignments of the connector
differ from those of the connector manufacturer.
Notes:
1.
Connection of the signals differs depending on the package. For details, refer to the
MPU's pin assignments.
2.
The range of communication that the emulator operates at is different depending on
the MPU used.
3.
To connect the signals from the connector, refer to section 1 in the additional
document, Supplementary Information on Using the SHxxxx.
74
CAUTION
Advertisement
Table of Contents
