Renesas SH-4A User Manual page 222

[Sequential reset]: Selects whether or not AUD event channel Ch1 is used as the reset
[Action]:
Note: When the sequential AUD event condition is set and the eventpoint condition is edited
with the AUD event channel that has been selected for [Channel select], the [Action] page
cannot be modified. To modify the settings of the [Action] page, cancel the sequential
AUD event condition.
198
[Channel 5 -> 4 -> 3 -> 2]:
After conditions have been matched in the order of AUD event channel
5 -> 4 -> 3 -> 2, a sequential AUD event occurs.
[Channel 6 -> 5 -> 4 -> 3 -> 2]:
After conditions have been matched in the order of AUD event channel
6 -> 5 -> 4 -> 3 -> 2, a sequential AUD event occurs.
[Channel 7 -> 6 -> 5 -> 4 -> 3 -> 2]:
After conditions have been matched in the order of AUD event channel
7 -> 6 -> 5 -> 4 -> 3 -> 2, a sequential AUD event occurs.
[Channel 8 -> 7 -> 6 -> 5 -> 4 -> 3 -> 2]:
After conditions have been matched in the order of AUD event channel
8 -> 7 -> 6 -> 5 -> 4 -> 3 -> 2, a sequential AUD event occurs.
point.
[Disable]: Not used as the reset point.
[Enable]: Used as the reset point.
Specifies the operation after the sequential AUD event has been
detected.
[Break]: Breaks after the sequential AUD event has been detected.
[Trace stop]: Stops AUD trace after the sequential AUD event has been
detected.