Repair Provisions; Repair With Extra-Charge; Replacement With Extra-Charge; Expiration Of The Repair Period - Renesas SH-4A User Manual

Microcomputer development environment system
Hide thumbs Also See for SH-4A:
Table of Contents

Advertisement

8.4

Repair Provisions

8.4.1

Repair with Extra-Charge

The products elapsed more than one year after purchase can be repaired with extra-charge.
8.4.2

Replacement with Extra-Charge

If your product's fault falls in any of the following categories, the fault will be corrected by
replacing the entire product instead of repair, or you will be advised to purchase new one,
depending on the severity of the fault.
• Faulty or broken mechanical parts
• Flaw, separation, or rust in coated or plated parts
• Flaw or cracks in plastic parts
• Faults or breakage caused by improper use or unauthorized repair or modification
• Heavily damaged electric circuits due to overvoltage, overcurrent or shorting of power supply
• Cracks in the printed circuit board or burnt-down patterns
• Wide range of faults that makes replacement less expensive than repair
• Unlocatable or unidentified faults
8.4.3

Expiration of the Repair Period

When a period of one year elapses after the model was dropped from production, repairing
products of the model may become impossible.
8.4.4

Transportation Fees at Sending Your Product for Repair

Send your product to us for repair at your expense.
372

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sh4al-dspE200f

Table of Contents