Table of Contents
Advertisement
The external bus trace acquisition, acquisition start, and acquisition end can be controlled
depending on the specified external-bus eventpoint condition. For setting eventpoints,
refer to section 5.6, Using the Eventpoints.
With this function, information of a maximum of 262,144 cycles can be acquired in each
bus cycle.
Other Trace Functions:
When the optional peripheral I/O analyzer function is used for trace acquisition, the trace
result can be displayed on the same window.
(2) Useful functions of the [Trace] window
The [Trace] window provides the following useful functions.
(a) Searches for the specified data.
(b) Extracts the specified data.
(c) Filters and displays again the specified data.
(d) Supplements the information from the branch destination address to the next branch source
address.
For the usage of those functions, refer to section 5.7, Viewing the Trace Information.
(e) Changes the trace settings during user program execution.
Trace settings can be changed during user program execution.
34
Advertisement
Table of Contents
