Table of Contents
Advertisement
[Trace type]:
[AUD trace]
[Internal trace]
[User Memory trace]
[Trace Mode 1]:
[Realtime trace]
[Non realtime trace]
[Trace mode 2]:
[Trace continue]
[Trace stop]
[User memory area]:
[Start Address]
[End Address]
[Trace Extend Mode]: Sets whether or not internal performance counter Ch3 or Ch4 is included
[Trace data with PPC]
Note: The items that can be set in this window differ according to the product. For details on the
settings for each product, refer to the online help.
• Set the start and end addresses, which are in the memory range that outputs the trace result, in
the [Start] and [End] edit boxes of [User memory area], respectively.
• Enter the addresses depending on your environment. Do not specify the range that the
program has been downloaded to, as the memory contents are overwritten by the trace output
result.
350
Selects the type of trace function.
Selects the AUD trace function.
Selects the internal trace function.
Selects the user-memory output trace function.
Selects the operation mode when the trace information has been
sequentially generated.
Some trace information will not be output.
The CPU stops operations until the trace information is output.
Specifies the operation when the trace buffer becomes full.
The oldest trace information is overwritten to acquire the latest
trace information.
When the trace buffer becomes full, the trace information is no
longer acquired.
Sets the trace display range when the user-memory output trace function is
used.
Specifies the start address of the display range.
Specifies the end address of the display range.
as the item for trace acquisition.
When checked, internal performance counter Ch3 or Ch4 is
included.
Advertisement
Table of Contents
