Table of Contents
Advertisement
In this window, the following items are shown on the left as line information.
The first column (Source address column): Address information
The second column (Onchip event column): On-chip event information
The third column (AUD event column): AUD event information
The fourth column (BUS event column): External bus event information
The fifth column (CodeCoverage column): Coverage information
The sixth column (S/W breakpoint column): PC, bookmark, and breakpoint information
Note: When the trace unit is not connected to the emulator, the BUS event column is not
displayed.
Source address column
When a program is downloaded, an address for the current source file is displayed on the Source
address column. These addresses are helpful when setting the PC value or breakpoints.
Onchip event column
The Onchip event column displays the following item:
: An address condition for the on-chip event is set. The number of address conditions that can
be set is the same as that of on-chip event channels at which the address condition can be set.
The bitmap symbol above is shown by double-clicking the Onchip event column. This is also set
by using the popup menu.
Figure 5.11 Popup Menu for the Onchip Event Column
150
Advertisement
Table of Contents
