Table of Contents
Advertisement
5.7.4
Searching for a Trace Record
Use the [Trace Find] dialog box to search for a trace record. To open this dialog box, choose
[Find...] from the popup menu.
The [Trace Find] dialog box has the following options:
Table 5.4
[Trace Find] Dialog Box Pages
Page
[General]
[Address]
[Data]
[Type]
[Bus]
[R/W]
Note: Items other than [General] and [Address] vary according to the emulator in use. For details,
refer to the online help.
Clicking the [OK] button after setting conditions in those pages stores the settings and starts
searching. Clicking the [Cancel] button closes this dialog box without setting conditions.
When a trace record that matches the search conditions is found, the line for the trace record will
be highlighted. When no matching trace record is found, a message dialog box will appear.
Only the trace information that satisfies all the conditions set in above pages will be searched.
If a search operation is successful, selecting [Find Next] from the popup menu will move to the
next found item.
Description
Sets the range for searching.
Sets an address condition.
Sets a data condition.
Selects the type of trace information.
Selects the type of a bus.
Selects the type of access cycles.
227
Advertisement
Table of Contents
