Table of Contents
Advertisement
1. I have a text file open in the editor but syntactic color-coding is not being displayed.
Ensure that you have named the file (i.e. saved it) and that the "Syntax coloring" check box is
set on the "Editor" tab of the "Options" dialog box, which is launched via [Setup ->
Options...]. The High-performance Embedded Workshop looks up the filename extension to
determine the group to which the file belongs and decides whether or not coloring should be
applied to the file. To view the currently defined filename extensions and file groups, select
[Project -> File Extensions...] to launch the "File Extensions" dialog box. To view the
coloring information, select [Setup -> Format] to display the "Color" tab of the "Format"
dialog box (for further details, see the "Syntax Coloring" section in Chapter 4, "Using the
Editor," of the volume on the High-performance Embedded Workshop).
2. I want to change the settings of a tool but the [Tools ->Administration...] menu option is not
selectable.
[Tools ->Administration...] is not selectable while a workspace is open. To open the "Tool
Administration" dialog box, close the current workspace.
3. I opened a workspace from my PC, and one of my colleagues opened the same workspace
simultaneously from another PC. I changed the settings of the workspace and saved it. My
colleague saved the workspace after me. I opened the workspace again and found that the
settings of the workspace differed from those I had made.
The last settings to be saved are effective. While a workspace is open in the High-performance
Embedded Workshop, updating of the workspace is within the memory. The settings are not
saved in a file unless the user intentionally saves the workspace.
In addition to above, refer to FAQs on the emulator and High-performance Embedded Workshop
on the Renesas web site (www.renesas.com).
Section 7 Troubleshooting
369
Advertisement
Table of Contents
