Table of Contents
Advertisement
Table 1.1 Emulator Functions (cont)
No.
Item
5
Break functions
6
Performance
measurement function
7
Peripheral I/O analyzer
function
22
Function
•
Breaks at satisfaction of a PC breakpoint condition (1000
points)
•
Breaks at on-chip event detection
•
Breaks at AUD event detection
•
Breaks at external-bus event detection
•
Breaks at other types of event detection
•
Breaks at overflow of a trace buffer
•
Forced break function
•
Uses a counter in the device to measure the number of
cycles that passes during point-to-point execution.
•
Uses an AUD event channel to measure the time or counts
of point-to-point, point-to-range, or range-to-range execution.
•
Uses the performance function of an external bus to measure
the time or counts of range, point-to-point, or range-to-range
execution.
•
Measures the number of cycles that pass in executing
individual functions and lists them at the end of execution
from a 'Go' command.
•
Measures the execution time or execution counts of functions
in the address range specified by the user and lists them at
the end of execution from a 'Go' command.
•
Monitors generated events of the specific peripheral I/O or
acquires them by a trace.
The supported peripheral I/Os differ depending on the MPU.
For this function, refer to the additional document,
Supplementary Information on Using the SHxxxx.
Advertisement
Table of Contents
