Table of Contents
Advertisement
(2) AUD trace function
This function is available when the AUD pin of the MPU is connected to the emulator.
An Onchip Eventpoint must be set in order to output MPU information from the AUD pin.
The following is an example of acquiring memory access information between addresses H'FFC0
to H'FFE4 (array a).
The following is the procedure for setting the AUD trace function.
(a) Setting the Onchip Eventpoint
Set the Onchip Eventpoint so that the AUD trace acquisition condition can be set to the execution
information on the MPU that is output from the AUD pin, referring to section 5.6, Using the
Eventpoints.
• Set the window trace from H'0 to H'10000 to Onchip Event channel Ch5 (OA).
• Select and double-click [Ch5(OA)] in the [Onchip Event] sheet of the [Event] window.
• The [Event condition 5] dialog box will appear.
• In the [Window address] page, specify the range of the memory access information to be
output from the AUD pin.
341
Advertisement
Table of Contents
