(c) Setting the trace acquisition condition
The following is an example of acquiring memory access information.
For acquiring other trace information, refer to section 5.6, Using the Eventpoints.
Select and double-click [Ch2 (Delay)] on the [AUD Event] sheet of the [Event] window. The [Ch2
(Delay)] dialog box will appear.
Select the type of trace information to be acquired on the [General] page.
Figure 6.50 [Ch2 (Delay)] Dialog Box ([General] Page)
• Select [Window trace data] and click the [Window] page.
• The memory access range condition can be set in the [Window] page.
345