Table of Contents
Advertisement
[BUS buffer over flow]:
[Trace continue]
[Trace stop]
[Break]
[BUS trace mode]:
[Enable free trace]
[CS2 SDRAM trace]
[CS3 SDRAM trace]
[Time stamp clock]
[Trace display range]:
[Start pointer]
[End pointer]
5.7.3
Hiding the [Trace] Column
It is possible to hide any column not necessary in the [Trace] window. Selecting a column you
want to hide from the popup menu displayed by clicking the right-hand mouse button on the
header column hides that column. To display the hidden column, select the column from the said
popup menu again. Dragging the column with the mouse changes the display order.
226
Specifies the operation when the external bus trace buffer of the
emulator becomes full.
The oldest trace information is overwritten by the latest
information.
When the trace buffer becomes full, the trace information is no
longer acquired.
A break occurs.
Sets the mode when the external bus trace function is used.
Enables external-bus free trace.
Recognizes the CS2 area as SDRAM to be analyzed by a trace.
Recognizes the CS3 area as SDRAM to be analyzed by a trace.
Specifies the resolution of the timer for time stamp as any of the
following values:
20 ns, 40 ns, 100 ns, or 400 ns
Sets the trace display range.
Enters the numerical start pointer value of the display range.
Enters the numerical end pointer value of the display range.
Advertisement
Table of Contents
