Table of Contents
Advertisement
6.18 Break Function by an Eventpoint
With this emulator, an Onchip Eventpoint, AUD Eventpoint, Other Eventpoint, and BUS
Eventpoint can be set. An example of how to set a break using an Onchip Eventpoint is shown
below. For other eventpoint setting methods, refer to section 5.6, Using the Eventpoints.
6.18.1 Setting the Break by an Onchip Eventpoint
A method is given below in which the address bus condition is set under event channel 1 (Ch1
(IA_OA)) of the Onchip Eventpoint.
• Select [Eventpoints] from the [Code] submenu of the [View] menu. The [Event] window is
displayed.
• The PC breakpoint that has been previously set is deleted. Click the [Event] window with the
right-hand mouse button and select [Delete All] from the popup menu to cancel all PC
breakpoints that have been set.
• To set an Onchip Eventpoint, click on [Onchip Eventpoint].
Up to 13 conditions can be set independently for the Onchip Eventpoints. In this example, set
event channel 1.
Note: The number of event channels of the Onchip Eventpoint differs according to the product.
For the number that can be specified for each product, refer to the online help.
326
Advertisement
Table of Contents
