4.2 Method for Activating High-performance Embedded Workshop
To activate the High-performance Embedded Workshop, follow the procedure listed below.
1. Connect the emulator to the host machine and the user system, then turn on the user system.
2. Select [High-performance Embedded Workshop] from [Renesas High-performance Embedded
Workshop] of [Programs] in the [Start] menu.
3. The [Welcome!] dialog box is displayed.
[Create a new project workspace] radio button:
[Open a recent project workspace] radio button:
[Browse to another project workspace] radio button: Uses an existing workspace; this radio
In this section, we describe the following three ways to start up the High-performance Embedded
Workshop:
•
[Create a new project workspace] - a toolchain is not in use
•
[Create a new project workspace] - a toolchain is in use
•
[Browse to another project workspace]
Figure 4.16 [Welcome!] Dialog Box
Creates a new workspace.
Uses an existing workspace and displays
the history of the opened workspace.
button is used when the history of the
opened workspace does not remain.
103