Table of Contents
Advertisement
(1) [General] page
Set the range for searching.
[Trace search range]:
[Not designation]:
[Upward search]:
[Start PTR]:
[End PTR]:
Note: Along with setting the range for searching, PTR values to start and end searching can be
set in the [Start PTR] and [End PTR] options, respectively.
228
Figure 5.62 [Trace Find] Dialog Box ([General] Page)
Sets the range for searching.
Searches for information that does not match the conditions
set in other pages when this box is checked.
Searches upwards when this box is checked.
Enters a PTR value to start a search.
Enters a PTR value to end a search.
Advertisement
Table of Contents
