Table of Contents
Advertisement
Note: The contents of the Onchip event column are erased when conditions other than the
address condition are added to each channel by using the [Edit] menu or in the [Event]
window.
AUD event column
The AUD event column displays the following item:
: An AUD break is set.
: An AUD sequential break is set.
: An AUD trace acquisition is set.
: An AUD trace start is set.
: An AUD trace stop is set.
: An AUD trace sequential stop is set.
: An AUD performance start is set.
: An AUD performance stop is set.
The bitmap symbols for break above are shown by double-clicking the AUD event column. These
are also set by using the popup menu.
Note: The contents of the AUD event column are erased when conditions other than the address
condition are added to each channel by using the [Edit] menu or in the [Event] window.
Figure 5.12 Popup Menu for the AUD Event Column
151
Advertisement
Table of Contents
