Table of Contents
Advertisement
6.17 Break Function
The emulator has PC break functions and break functions by eventpoints. With the High-
performance Embedded Workshop, a PC breakpoint can be set using the [Breakpoint] sheet of the
[Event] window. The eventpoint condition setting can be set by the event type using the [Onchip
Event], [AUD Event], [Other Event], and [BUS Event] sheets.
An overview and setting of the break function are described below.
6.17.1 PC Break Function
The emulator can set up to 1000 PC breakpoints. Other methods for setting a PC breakpoint than
in section 6.7, Setting a PC Breakpoint, are described below.
• Select [Eventpoints] from the [Code] submenu of the [View] menu. The [Event] window is
displayed.
• Select the [Breakpoint] sheet.
Figure 6.31 [Event] Window (Before PC Breakpoint Setting)
321
Advertisement
Table of Contents
