Table of Contents
Advertisement
Clicking the [OK] button stores the settings. Clicking the [Cancel] button closes this dialog box
without modifying the settings.
5.7.2
Opening the [BUS/MFI trace] Window
To display the [Trace Window Type] dialog box, choose [View -> Code -> Trace] or click the
[Trace] toolbar button (
Selecting [BUS/MFI trace] and clicking the [OK] button displays the [BUS/MFI trace] window.
Notes: 1. When the trace unit is not connected to the emulator, the external bus trace function is
not supported.
2. When the function of the trace unit is changed, the number of bus cycles that can be
acquired by the external bus trace is changed. For details, refer to section 5.1.4, [Bus
Board] Page.
3. Not only the BUS trace but also other trace functions can be displayed in this window
depending on the product. For example, the display will be [BUS/MFI Trace] in the
SH-Mobile MPUs. In this case, the result of the access via MFI that has been acquired
by a trace is displayed. For details on the specifications of each product, refer to the
online help.
(1) Acquiring External Bus Trace Information (BUS trace)
Selecting the [Set...] menu in the popup menu of the [BUS/MFI trace] window displays the [BUS
acquisition] dialog box. When [BUS/MFI trace] is selected in [Trace Type] within the dialog box,
the trace information is acquired by using the external bus trace function.
When the emulator does not set the acquisition condition of the trace information, the trace
information is acquired by the external bus trace function in default.
The acquired trace information is displayed in the [BUS/MFI trace] window.
).
Figure 5.59 [Trace Window Type] Dialog Box
223
Advertisement
Table of Contents
