Renesas SH-4A User Manual page 47

Table 1.1 Emulator Functions (cont)
No. Item
8 Memory access functions
9 General/control register
access function
10 Internal I/O register
access function
11 Source-level debugging
function
12 Coverage function
13 Command line function
14 Help function
Note: The [IO] window displays the contents defined in [SHxxxx.io]. Editing those contents adds
or deletes the registers to be displayed. For the contents to be described as [SHxxxx.io],
refer to reference 5, I/O File Format, in the High-performance Embedded Workshop V.4.00
User's Manual.
The following directory contains [SHxxxx.io] (xxxx means the core name.):
<High-performance Embedded Workshop folder>:
\Tools\Renesas\DebugComp\Platform\E200F\xxxx\IOFiles
The specific functions of the emulator are described in the next section.
Function
•
Downloading to RAM
•
Downloading to flash memory
•
Single-line assembly
•
Reverse assembly (disassembly)
•
Reading of memory
•
Writing to memory
•
Automatic updating of a display of selected variables during
user program execution
•
Fill
•
Search
•
Move
•
Copy
•
Monitor (physical or virtual address)
•
Emulation memory
Reads or writes the general/control registers.
Reads or writes the internal I/O registers.*
Various source-level debugging functions.
Displays the information of executed instructions.
Supports command input.
Batch processing is enabled when a file is created by arranging
commands in input order.
Describes the usage of each function or command syntax input
from the command line window.
23