Renesas SH-4A User Manual page 203

Table 5.3 Sequential Event Conditions (cont)
Type
[CPU CPU Extend
Sequential
Event] Page
(cont)
[SystemBus SystemBus
Sequential Sequential
Event] Page Event
SystemBus
Extend
Event Condition
Ch9 -> 8
Ch8 -> 9
Description
Expands the [CPU Sequential Extend] page.
The sequential setting is enabled with any
combination.
For details, refer to 'Sequential Break Extension
Setting' in this section.
Halts a program after conditions have been
matched for Event Condition 9, 8.
An event condition must be set for Ch9 and Ch8.
Halts a program after conditions have been
matched for Event Condition 8, 9.
An event condition must be set for Ch8 and Ch9.
Expands the [SystemBus Sequential Extend] page.
The sequential setting is enabled with any
combination.
For details, refer to 'Sequential Break Extension
Setting' in this section.
179