Table of Contents
Advertisement
5.9.8
[Tree] Sheet
This sheet displays the relation of function calls along with the profile data that are values when
the function is called. This sheet is available when [Disable Tree (Not traces function call)] is not
selected from the pop-up menu in the [Profile] window.
Double-clicking a function in the [Function] column expands or reduces the tree structure display.
The expansion or reduction is also provided by the "+" or "-" key. Double-clicking the [Address]
column displays the source program corresponding to the specific address.
Right-clicking on the mouse within the window displays a pop-up menu. Supported menu options
are described in the following:
• View Source
Displays the source program or disassembled memory contents for the address in the selected
line.
• View Profile-Chart
Displays the [Profile-Chart] window focused on the function in the specified line.
• Enable Profiler
Toggles acquisition profile data. When profile data acquisition is active, a check mark is
shown to the left of the menu text.
• Not trace the function call
Stops tracing function calls while profile data is acquired. This menu is used when acquiring
profile data of the program in which functions are called in a special way, such as task
switching in the operating system.
Figure 5.91 [Tree] Sheet
261
Advertisement
Table of Contents
