Table of Contents
Advertisement
5.10.3
Starting Measurement
When the user program is executed, measurement is started.
When the user program is halted, the measurement result is displayed in the [Realtime Profile]
window.
5.10.4
Clearing Measurement Result
Selecting [Clear Data] from the popup menu clears the measurement result of the [Column] and
[Time] columns.
5.10.5
Deleting Measurement Range
Selecting [Delete] from the popup menu deletes all the specified measurement range and clears the
measurement result.
5.10.6
Setting the Minimum Unit of the Measurement Time
In the emulator, it is possible to change the minimum unit of the measurement time as any of 20
ns, 40 ns, 100 ns, or 400 ns.
At 20 ns, the maximum time that can be measured is about three hours.
At 40 ns, the maximum time that can be measured is about six hours.
At 100 ns, the maximum time that can be measured is about 15 hours.
276
Figure 5.102 [Select Page] Dialog Box
Advertisement
Table of Contents
