5.6.5
Setting Onchip Eventpoints
On the [Onchip Event] sheet, the settings for Onchip Eventpoints are displayed and modified.
Since the number of event detection channels and the contents to be set differ depending on the
product, refer to the online help for each product.
Items that can be displayed in the sheet are listed below.
[Type]
On-chip event channel number and type
[State]
Whether the eventpoint is enabled or disabled
[Condition] A condition that satisfies an eventpoint. The displayed contents differ depending on
the channel.
[Action]
Operation of the emulator when an eventpoint condition is satisfied. The displayed
contents differ depending on the channel.
Figure 5.28 [Event] Window ([Onchip Event] Sheet)
173